+64 9 537 8615
Info@fse.co.nz

FirePro Control Equipment

FirePro Control Equipment

Whatever the job, whatever the solution required, Fire Safety Equipment has the control equipment to suit. From AS 5062 approved vehicle panels to certified marine and land-based panels. We stock all the options.

Our full range of products gives our customers the ability to make an informed decision. Contact us today.

FP-8451
FP-8451

Features
Manual or Auto operation
Twin power supply inputs
2 Detection circuits – works with Thermal ROR, smoke detectors, or LHD
Monitored circuits
Options for delayed or second shot and Shutdown relay.
AS 5062 Approved Control Panel.

FP-8100
FP-8100

Features

Used in Vehicle or Marine Applications.
Can be configured to operate with/without LHD detection.
IP65 Rated 12-24vDC.
Has inbuilt siren with output available for an external siren.
Activates up to 4 FP Units.

FP-8450
FP-8450

Features

Manual or Auto operation
Twin power supply inputs
2 Detection circuits – works with Thermal ROR, smoke detectors, or LHD
Capable of double knock operation
All circuits monitored
Options for delayed or second shot.

FPC-2
FPC-2

Features
Can be used as a sub-panel or main panel for local protection solutions.
Monitored circuits
Can use LHD, heat or smoke detectors
Activate up to 4 FirePro units.
Automatic extinguishing
24vDC Power
Signal for fire/fault conditions.

FP-8850 Delay Discharge
FP-8850 Delay Discharge

Features
Delay Discharge Module allows for the addition of FirePro Generators above the limit of 4 in the standard panel.
Also provides for delayed discharge of units should longer agent discharge time is required
All circuits monitored.

FP-8860 Shutdown Control
FP-8860 Shutdown Control

Features
The shutdown module connects via the siren circuit and will allow for selectable delays for the shutdown of devices. It Provides a volt Free Contact (NO or NC) which can be used with appropriately rated relays.

FP-8872 Backup Battery
FP-8872 Backup Battery

Features
Power Control Module allows for secondary power supply to be added where required. 12/24v NiMH Battery.

FP-8880 Test Simulator
FP-8880 Test Simulator

Features
This test unit is used to check wiring connections. Used in commissioning and testing of the systems. Each system has different requirements for this device – check the manual for correct selection.

FP-8917 Activation Kit
FP-8917 Activation Kit

Features
Autonomous fire suppression system
Single input detection loop
Linear heat detector cable
Compatible with FP-14053 Manual Switch

FPX-103C
FPX-103C

Features
CE Certified
Dual detection loops with monitoring
Automatic Engine,fuel,fan shutdown
Spindown delay
12 or 24vDC power

FP-8500 - IMO Certified
FP-8500 - IMO Certified

Features
IMO Certified
LED Display
Activates up to 84 FirePro generators
Time delayed releasing function (optional)

FS12 - DNV Certified
FS12 - DNV Certified

Features
DNV Approved (A-12563), according to IMO MSC 1270
Suitable for use in both small and large installations
System monitoring ensures detection of system faults

FP-10453 Cable
FP-10453 Cable

Features
Electrical Installations to be completed using 2 Core Screened Fire Rated Cable.

Cable Looms/Plugs
Cable Looms/Plugs

Features
colour-coded for easy Installation. IP68 and rated to UL94 Flammability test. Supplied to correct lengths.

FP-14053
FP-14053

Features
Aluminium Moulded Switch with Stainless Steel mount. Safety pin to protect against accidental activation.